PRODUCTS
- For flow ranges between 50cc to 5L/min.
- Individually calibrated to any unit of measure.
- Accuracy +/- 3% across full scale.
- Single or dual scale.
- Low pressure drop.
- Viscosities up to 600cSt.
- 1% rate of repeatability at switch set point.
- Installed in any position.
- Weatherproof enclosure box.
- Available in a wide range of materials.
- Individually calibrated to any unit of measure.
- Accuracy +/- 3% across full scale.
- Accuracy +/- 3% across full scale.
- Single or dual scale.
- Simple modular design.
- Low pressure drop.
- Viscosities up to 600cSt.
- 1% rate of repeatability at switch set point.
- Installed in any position.
- Weatherproof enclosure box.
- Capable of twice the indicated flow
- Individually calibrated to any unit of measure.
- Accuracy +/- 3% across full scale.
- Single or dual scale.
- Simple modular design.
- Low pressure drop.
- Viscosities up to 600cSt.
- 1% rate of repeatability at switch set point.
- Installed in any position.
- Weatherproof enclosure box.
- Capable of twice the indicated flow.
- Individually calibrated to any unit of measure.
- Accuracy +/- 3% across full scale.
- Single or dual scale.
- Simple modular design.
- Low pressure drop.
- Viscosities up to 600cSt.
- 1% rate of repeatability at switch set point.
- Installed in any position.
- Weatherproof enclosure box.
- Capable of twice the indicated flow.
- 1/4 inch to 1 inch BSP/NPT connection.
- Easy to install in any position.
- No special piping or connections required.
- Robust with good shock and vibration resistance.
- Resistant to a wide range of chemicals.
- Temperature – 80°C (maximum working temperature).
- Pressure – 40 bar (maximum working pressure).
- High quality and robust design.
- Body cast in stainless steel or carbon steel.
- Threaded or flanged connections.
- Pressure up to 40 Bar.
- Temperature up to 250 degrees.
- Can be mounted in any orientation.
- CE Marked and fully compliant with the Pressure Equipment Directive.
- Available with flap, sprung flap or PTFE spinne.
- Connection size ¼ inch (DN08) to 16 inch (DN400).
- Designed and manufactured in the UK.
- Robust with good shock and vibration resistance.
- Short lead times.
- No routine maintenance required.
- 8 – 25mm (1/4” to 1 ½”) connections available.
- Unrivalled flow and pressure drop performance.
- Bi-directional flow.
- Operates over a wide flow range.
- Designed and manufactured in the UK.
- Robust with good shock and vibration resistance.
- Short lead times.
- Easy to install in any orientation.
- No routine maintenance required.
- 8 – 25mm (1/4” to 1 ½”) connections available.
- Unrivalled flow and pressure drop performance.
- Bi-directional flow.
- Operates over a wide flow range.
- Individually calibrated to any unit of measure.
- Accuracy +/- 3% across full scale.
- Single or dual scale.
- Simple modular design.
- Low pressure drop.
- Viscosities up to 600cSt.
- 1% rate of repeatability at switch set point.
- Installed in any position.
- Weatherproof enclosure box.
- Capable of twice the indicated flow.
- Working Temp - 50ºC to + 282ºC.
- Accuracy + / -0.5% of reading over Flow Range.
- Repeatability + / - 0.15% of reading.
- Pressure Drop Less than 0.5 bar at Maximum Flow.
- Materials All 316 Stainlesss Steel with ANC1A Rotor.
- Bearings Wear Resistant Tungsten Carbide Sleeve.
- Pick Up The Lx variable reluctance sensor is hermetically sealed for resistance to moisture and can withstand repeated thermocycling..
- The magnet is resistant to demagnetization..
- Output is a low level signal that ranges from 10 mV to 1 V peak to peak..
- A screened twin core signal cable should be used for connection to the Pick Up..
